2009 Ford Explorer Sport Trac

midsize SUV / 4-door SUV

Crashworthiness

Rating overview
Moderate overlap front: original test
Head restraints & seats

Key

  • G
    Good
  • A
    Acceptable
  • M
    Marginal
  • P
    Poor
  • Superior
  • Advanced
  • Basic

Some ratings use a scale of Poor to Good. Others range from Basic to Superior.

Moderate overlap front: original test

Rating applies to 2007-10 models

Tested vehicle: 2006 Ford Explorer XLT 4-door 4wd

The Ford Explorer and Mercury Mountaineer were re-engineered for the 2006 model year. Moderate overlap frontal ratings are assigned by the Institute based on a test conducted by Ford.

The moderate overlap frontal crash test ratings also apply to the Explorer Sport Trac, which was redesigned for the 2007 model year (no 2006 model Sport Trac was available). The Sport Trac is very similar to the Explorer, except that it has a longer wheelbase and an open cargo bed behind the occupant compartment in place of the Explorer's enclosed cargo area with optional third row seat.

Overall evaluation
Structure and safety cage
Driver injury measures
Head/neck
Chest
Leg/foot, left
Leg/foot, right
Driver restraints and dummy kinematics
Technical measurements for this test

Measures of occupant compartment intrusion on driver side

Test ID VTF0602
Footwell intrusion
Footrest (cm) 9
Left (cm) 9
Center (cm) 9
Right (cm) 8
Brake pedal (cm) 6
Instrument panel rearward movement
Left (cm) 4
Right (cm) 3
Steering column movement
Upward (cm) 4
Rearward (cm) -4
A-pillar rearward movement (cm) 5

Driver injury measures

Test ID VTF0602
Head
HIC-15 353
Peak gs at hard contact 18
Neck
Tension (kN) 1.3
Extension bending moment (Nm) 8
Maximum Nij 0.25
Chest maximum compression (mm) 34
Legs
Femur force - left (kN) 0.2
Femur force - right (kN) 0.3
Knee displacement - left (mm) 4
Knee displacement - right (mm) 1
Maximum tibia index - left 0.50
Maximum tibia index - right 0.47
Tibia axial force - left (kN) 2.1
Tibia axial force - right (kN) 2.0
Foot acceleration (g)
Left 86
Right 82

About the original moderate overlap front test

Head restraints & seats

Seat type: Manual - power cloth seats

Overall evaluation
Dynamic rating
Seat/head restraint geometry
Technical measurements for this test
Seat type Manual - power cloth seats
Geometry
Backset (mm) 33
Distance below top of head (mm) 13
Seat design parameters
Pass/fail Fail
Max T1 acceleration (g) 12.0
Head contact time (ms) 87
Force rating 1
Neck forces
Max neck shear force (N) 0
Max neck tension (N) 506

About the head restraint & seat test
Currently, IIHS tests apply only to front seats.