2005 Scion tC

small car / 2-door hatchback

Crashworthiness

Rating overview
Evaluation criteria	Rating
Moderate overlap front: original test
Side: original test
Head restraints & seats

Key

G
Good
A
Acceptable
M
Marginal
P
Poor

Superior
Advanced
Basic

Some ratings use a scale of Poor to Good. Others range from Basic to Superior.

Moderate overlap front: original test

Rating applies to 2005-10 models

Tested vehicle: 2009 Scion tC 2-door

The Scion tC was introduced in the 2005 model year.

Evaluation criteria	Rating
Overall evaluation
Structure and safety cage
Driver injury measures
Head/neck
Chest
Leg/foot, left
Leg/foot, right
Driver restraints and dummy kinematics

Action shot taken during the frontal offset crash test.

The dummy's position in relation to the steering wheel and instrument panel after the crash test indicates that the driver's survival space was maintained well.

A high head acceleration occurred when the dummy's head hit the steering wheel through the airbag.

Forces on the lower right leg were high enough to indicate the possibility of injuries.

Technical measurements for this test

Evaluation criteria	Measurement
Test ID	CEF0908
Footwell intrusion
Footrest (cm)	8
Left (cm)	11
Center (cm)	12
Right (cm)	7
Brake pedal (cm)	2
Instrument panel rearward movement
Left (cm)	1
Right (cm)	1
Steering column movement
Upward (cm)	4
Rearward (cm)	0
A-pillar rearward movement (cm)	2

Evaluation criteria	Measurement
Test ID	CEF0908
Head
HIC-15	440
Peak gs at hard contact	81
Neck
Tension (kN)	1.2
Extension bending moment (Nm)	7
Maximum Nij	0.31
Chest maximum compression (mm)	0
Legs
Femur force - left (kN)	0.8
Femur force - right (kN)	2.2
Knee displacement - left (mm)	1
Knee displacement - right (mm)	1
Maximum tibia index - left	0.47
Maximum tibia index - right	1.09
Tibia axial force - left (kN)	2.1
Tibia axial force - right (kN)	4.7
Foot acceleration (g)
Left	64
Right	90

About the original moderate overlap front test

Side: original test

Rating applies to 2005-10 models

Tested vehicle: 2009 Scion tC 2-door with standard front and rear head curtain airbags and standard front seat-mounted torso airbags

The Scion tC was introduced in the 2005 model year.

Evaluation criteria	Rating
Overall evaluation
Structure and safety cage
Driver injury measures
Head/neck
Torso
Pelvis/leg
Driver head protection
Rear passenger injury measures
Head/neck
Torso
Pelvis/leg
Rear passenger head protection

View of the vehicle and barrier just after the crash test.

View of the vehicle after the crash with door removed, showing the side airbags and damage to the occupant compartment.

Smeared greasepaint shows where the driver dummy's head was protected from being hit by hard structures by the side curtain airbag.

Smeared greasepaint shows where the rear passenger dummy’s head was protected by the side airbag.

Technical measurements for this test

Test ID	CES0912
B-pillar to longitudinal centerline of driver's seat (cm)	-12.5
Negative numbers indicate the amount by which the crush stopped short of the seat centerline.

Evaluation criteria	Measurement
Test ID	CES0912
Head HIC-15	546
Neck
Tension (kN)	0.9
Compression (kN)	0.1
Shoulder
Lateral deflection (mm)	34
Lateral force (kN)	3.0
Torso
Maximum deflection (mm)	32
Average deflection (mm)	23
Maximum deflection rate (m/s)	9.88
Maximum viscous criterion (m/s)	0.95
Pelvis
Iliac force (kN)	3.8
Acetabulum force (kN)	1.2
Combined force (kN)	4.4
Left femur
L-M force (kN)	0.6
L-M moment (Nm)	237
A-P moment (Nm)	108

Evaluation criteria	Measurement
Test ID	CES0912
Head HIC-15	295
Neck
Tension (kN)	0.5
Compression (kN)	0.5
Shoulder
Lateral deflection (mm)	35
Lateral force (kN)	1.3
Torso
Maximum deflection (mm)	26
Average deflection (mm)	14
Maximum deflection rate (m/s)	3.08
Maximum viscous criterion (m/s)	0.37
Pelvis
Iliac force (kN)	0.3
Acetabulum force (kN)	1.9
Combined force (kN)	1.9
Left femur
L-M force (kN)	0.3
L-M moment (Nm)	224
A-P moment (Nm)	-52

About the original side crash test

Head restraints & seats

Seat type: Manual cloth seats

Overall evaluation
Dynamic rating
Seat/head restraint geometry

Technical measurements for this test

Seat type	Manual cloth seats
Geometry
Backset (mm)	48
Distance below top of head (mm)	66
Seat design parameters
Pass/fail	Fail
Max T1 acceleration (g)	11.1
Head contact time (ms)	90
Force rating	2
Neck forces
Max neck shear force (N)	170
Max neck tension (N)	874

About the head restraint & seat test
Currently, IIHS tests apply only to front seats.