Moderate overlap front: original test
Rating applies to 2005-08 models
Tested vehicle: 2005 Suzuki Forenza S 4-door
The Suzuki Forenza was introduced in the 2004 model year. The Reno hatchback was introduced in the 2005 model year, and both cars received side airbags and advanced frontal airbags in 2005.
Overall evaluation | |
---|---|
Structure and safety cage | |
Driver injury measures | |
Head/neck | |
Chest | |
Leg/foot, left | |
Leg/foot, right | |
Driver restraints and dummy kinematics Dummy movement was reasonably well controlled. During rebound, the dummy's head hit the B-pillar and roof rail. |
Action shot taken during the frontal offset crash test.
The dummy's position in relation to the steering wheel and instrument panel after the crash test indicates that the driver's survival space was maintained well.
Smeared greasepaint indicates where the dummy’s head hit the B-pillar during rebound. Head acceleration from this hit was high.
Forces on the lower right leg were high enough to indicate the possibility of injury.
Measures of occupant compartment intrusion on driver side
Test ID | CEF0420 |
---|---|
Footwell intrusion | |
Footrest (cm) | 11 |
Left (cm) | 16 |
Center (cm) | 15 |
Right (cm) | 10 |
Brake pedal (cm) | 6 |
Instrument panel rearward movement | |
Left (cm) | 5 |
Right (cm) | 3 |
Steering column movement | |
Upward (cm) | -3 |
Rearward (cm) | 5 |
A-pillar rearward movement (cm) | 6 |
Driver injury measures
Test ID | CEF0420 |
---|---|
Head | |
HIC-15 | 288 |
Peak gs at hard contact | 147 |
Neck | |
Tension (kN) | 1.7 |
Extension bending moment (Nm) | 48 |
Maximum Nij | 0.41 |
Chest maximum compression (mm) | 0 |
Legs | |
Femur force - left (kN) | 4.3 |
Femur force - right (kN) | 3.4 |
Knee displacement - left (mm) | 3 |
Knee displacement - right (mm) | 5 |
Maximum tibia index - left | 0.37 |
Maximum tibia index - right | 1.12 |
Tibia axial force - left (kN) | 1.8 |
Tibia axial force - right (kN) | 4.6 |
Foot acceleration (g) | |
Left | 87 |
Right | 133 |
Head restraints & seats
Seat type: All seats
Overall evaluation | |
---|---|
Dynamic rating | |
Seat/head restraint geometry |
Seat type | All seats |
---|---|
Geometry | |
Backset (mm) | 92 |
Distance below top of head (mm) | 80 |
Seat design parameters | |
Pass/fail | Fail |
Max T1 acceleration (g) | 0.0 |
Head contact time (ms) | |
Force rating | 0 |
Neck forces | |
Max neck shear force (N) | |
Max neck tension (N) |
About the head restraint & seat test
Currently, IIHS tests apply only to front seats.